Note: These settings are for advanced users. We recommend that you do not change it if you are unsure of what you are doing. If you do run into problems, you can reset the Gateway back to default settings. To do this, insert a pointed object (like a straightened paperclip) into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button till the power light starts flashing - then release the button. You will need to run the Install CD that came in your kit again once you reset the Gateway

Advanced Settings >Device Settings > Update Firmware

Step 1: Obtain an updated software image file from your ISP.

Step 2: Enter the path to the image file location in the box below or click the "Browse" button to locate the image file.

Step 3: Click the "Update Software" button once to upload the new image file.

NOTE: The update process for the Gateway takes about 2 minutes to complete, and for the 3G modem takes about 10 minutes,
and your Gateway will reboot. Please DO NOT close the Browser and reload/or change the webpage during the update process.


Software File Name: