Note: These settings are for advanced users. We recommend that you do not change it
if you are unsure of what you are doing.
If you do run into problems, you can reset the Gateway back to default settings.
To do this, insert a pointed object (like a straightened paperclip)
into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button
till the power light starts flashing - then release the button.You will need to run the Install CD that came in your kit again once you reset the Gateway.
Advanced Settings > NAT > Port Forwarding
Virtual Server allows you to direct incoming traffic from WAN side
(identified by Protocol and External port) to the Internal server
with private IP address on the LAN side. The Internal port is required
only if the external port needs to be converted to a different
port number used by the server on the LAN side. A maximum 32 entries can be configured.
External Port Start
External Port End
Internal Port Start
Internal Port End
Server IP Address