Note: These settings are for advanced users. We recommend that you do not change it if you are unsure of what you are doing. If you do run into problems, you can reset the Gateway back to default settings. To do this, insert a pointed object (like a straightened paperclip) into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button till the power light starts flashing - then release the button.You will need to run the Install CD that came in your kit again once you reset the Gateway.

Advanced Settings > Access Control > IP Address

The IP Address Access Control mode, if enabled, permits access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is disabled, the system will not validate IP addresses for incoming packets. The services are the system applications listed in the Service Control List

Access Control Mode:   Disable   Enable


IP Address Remove