Note: These settings are for advanced users. We recommend that you do not change it if you are unsure of what you are doing. If you do run into problems, you can reset the Gateway back to default settings. To do this, insert a pointed object (like a straightened paperclip) into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button till the power light starts flashing - then release the button. you will need to run the Install CD that came in your kit again once you reset the Gateway

Advanced Settings > Routing > Default Gateway

If Enable Automatic Assigned Default Gateway checkbox is selected, this Gateway will accept the first received default Gateway assignment from WAN connection. If the checkbox is not selected, enter the static default Gateway AND/OR a WAN interface. Click 'Save/Apply' button to save it.

NOTE: If changing the Automatic Assigned Default Gateway from unselected to selected, You must reboot the Gateway to get the automatic assigned default Gateway.

Enable Automatic Assigned Default Gateway

 Use Default Gateway IP Address  
 Use Interface