Note: These settings are for advanced users. We recommend that you do not change it if you are unsure of what you are doing. If you do run into problems, you can reset the Gateway back to default settings. To do this, insert a pointed object (like a straightened paperclip) into the hole at the back of the Gateway labelled 'Reset'. Press and hold the reset button till the power light starts flashing - then release the button. you will need to run the Install CD that came in your kit again once you reset the Gateway

Advanced Settings > DNS > DNS Server Configuration

If 'Enable Automatic Assigned DNS' checkbox is selected, this Gateway will accept the first received DNS assignment from Wan connection during the connection establishment. If the checkbox is not selected, enter the primary and optional secondary DNS server IP addresses. Click 'Save' button to save the new configuration. You must reboot the Gateway to make the new configuration effective.

Enable Automatic Assigned DNS


Primary DNS server:
Secondary DNS server: